Skip to content

← Firmware Downloads

Firmware release notes · Reborn (Y2Linux) · Y2

Y2Linux 1.0 Beta 7.10

Reborn (Y2Linux) 1.0 update for the Innioasis Y2. Download it below, or let Updater CE install it for you.

Debian-based Linux with a fast clickwheel interface for the Innioasis Y2.

baseline-73Y22026-10-16schulzcode/y2linux

Download this release

Y2Linux 1.0 Beta 7.10: reliable USB file transfers. Linux 6.18 and the native Reborn music player for the Innioasis Y2.

Already running Y2Linux

Settings → About & Updates → Check for Updates → Update Now.

Fixed: copying, moving and deleting over USB

The automatic Internal Storage from Beta 7.9 is confirmed on a real player: the old files were kept exactly (checked byte for byte) and the new storage matches the original layout.

Everything from Beta 7.9 (Internal Storage on every player, radio firmware and SD card fixes) and earlier is included.

Install (from stock)

You need SP Flash Tool v5.2032, a USB cable, Y2Linux-1.0.0-beta.7.10-first-install.zip below and the Innioasis Y2 firmware package v3.2.0 from Innioasis (also your way back to stock).

  1. Unpack both.
  2. SP Flash Tool → Download Only → load MT6582_Android_scatter.txt from the Y2Linux zip. Exactly BOOTIMG, RECOVERY, ANDROID and USRDATA are ticked.
  3. Click Download and connect the switched-off Y2; wait for the green tick.
  4. Unplug and press Power: the player sets up its Internal Storage (a few seconds), then Y2Linux and Reborn start, music works.
  5. Connect the Y2 to the computer and copy (don't move) system.img from the Innioasis package into the Firmware folder on Internal Storage. The player takes the Wi-Fi/Bluetooth firmware from it and turns the radios on.

Full guide: INSTALL · How updates work: Recovery and updates

Known issues (beta)

Files

Beta software: use at your own risk. Not affiliated with Innioasis, MediaTek or Last.fm. Details: Beta 7.10 report.

Sources unchanged since an earlier release

Sources unchanged since an earlier release

Updating to Reborn (Y2Linux) 1.0

The same steps install this release for the first time or replace the build already on the player. Back up your music before you start.

  1. Check the model and type

    Confirm the player is an Innioasis Y2 before downloading. Y1 players come in two hardware revisions, Type A (software 2.0.0 or later) and Type B (earlier software); the two ROMs are not interchangeable.

  2. Download the package built for your computer

    Use Updater CE for the guided route, or download the portable package for Windows, macOS or Linux from this page. The release's own ZIP is also listed for manual flashing.

  3. Connect the player while it is switched off

    Use a data-capable USB cable and connect the player only when the installer asks. Keep it connected until the flash reports success.

  4. Verify the version after it reboots

    Open the player's Settings or About screen and check that it reports Reborn (Y2Linux) 1.0.

Install Reborn (Y2Linux) 1.0 on your computer

Pick the guide for the computer you will flash from. Each one names the exact package, its size and the steps that machine needs.

Windows

Install on Windows

Windows 11 and Windows 10 are supported; the legacy ZIP is for Windows 7/8 and 32-bit Windows, and Windows on ARM runs its own build natively.

353 MB · 126 MB

macOS

Install on macOS

The macOS package is universal: it runs on Apple silicon and Intel Macs.

169 MB

Linux

Install on Linux

Use the x64 build on an ordinary Intel or AMD desktop, the arm64 build on a Raspberry Pi or other ARM board, and the legacy ZIP on 32-bit Linux.

399 MB · 232 MB · 125 MB

Questions about this update

How do I update Innioasis Y2 to Reborn (Y2Linux) 1.0?

Download the package for your computer from this page, or open Updater CE and choose Reborn (Y2Linux) 1.0 for Innioasis Y2. Connect the player while it is switched off, then let the installer finish and let the player reboot.

Is Reborn (Y2Linux) 1.0 the latest Reborn (Y2Linux) release?

The release list on this page is ordered newest first, so the top entry is the latest published build. Preview and nightly builds are labelled as such.

Can I install Reborn (Y2Linux) 1.0 from another computer?

Yes. Download the ZIP here, copy it to the computer that can talk to the player, and follow the install guide there. The package is self-contained.

Which file do I download for Windows, macOS or Linux?

Each portable package in the download section is built for one computer. The guide pages linked under "Install on your computer" name the exact file and its size.

Published by schulzcode's Reborn project [1] [2]