Skip to content

Timmkoo SR1 ยท Linux

Install software on Timmkoo SR1 on Linux

The Timmkoo SR1 is a dedicated recorder built on the R1 Plus hardware. Its factory software is archived as rom_sr1.zip. The SR1 is a recorder, not a player, and its package must not be used on an R1 or PR1. These are the Linux routes for the Timmkoo SR1.

Get Updater CE for LinuxLinux install guidesLinux USB permission notes
Your computerWindowsmacOSLinux All platforms

Prepare Linux for the install

  1. Download UpdaterCE.AppImage, make it executable with chmod +x UpdaterCE.AppImage, and run it. The current AppImage targets Intel/AMD x86_64 systems.
  2. If the AppImage does not start on Ubuntu 22.04 or newer, install libfuse2 with your package manager. On Ubuntu 24.04 the package is libfuse2t64. Do not run the app as root.
  3. If Updater CE cannot open the player, add the MediaTek USB permission rule: save SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", MODE="0666", GROUP="plugdev" as /etc/udev/rules.d/51-innioasis.rules, then run sudo udevadm control --reload && sudo udevadm trigger. Add your user to plugdev if needed.

The official AppImage is for Intel/AMD Linux. No Linux ARM build is listed. Full Linux setup notes.

Software for the Timmkoo SR1

Original Software

Original Software on Timmkoo SR1

The stock Software path for restoring a Timmkoo SR1.

Linux guideFamily guides

Restore the stock system

The Timmkoo SR1 is a dedicated recorder built on the R1 Plus hardware. Its factory software is archived as rom_sr1.zip. The SR1 is a recorder, not a player, and its package must not be used on an R1 or PR1.

Restore Original Software on Timmkoo SR1Browse the Timmkoo SR1 archive

Questions people ask

Can I install custom software on the Timmkoo SR1 with Linux?

Yes, when the project lists the Timmkoo SR1. Every project card above opens the Linux guide for that software and model.

Do I need a driver on Linux?

Add the udev rule for vendor ID 0e8d and make the AppImage executable.

Will I lose my music?

Back up first. A full system install can wipe internal storage; the microSD card is normally left alone.

How do I restore the factory software?

Choose the model and Original Software in Updater CE, pick a stable release, then run Install / Restore.

Other platforms

WindowsmacOSAll Timmkoo SR1 guidesAll install guides

Was this useful?

Your answer helps improve this guide.