Skip to content

← Firmware Downloads

Firmware release notes · Y2Player · Y2

Y2Player V2.5

Y2Player Release2.5 update for the Innioasis Y2. Download it below, or let Updater CE install it for you.

A Y2 custom Software.

Release2.5Y22026-09-04schulzcode/Y2Player

Download this release

Y2Player v2.5 - Search, FM Radio, Faster Navigation, and Playback Reliability

Version 2.5 brings whole-device search, FM radio support for compatible Y2 hardware, faster navigation through large libraries, more flexible sleep-timer controls, and a redesigned equalizer interface.

This release also addresses several reported problems involving screen-off playback, shuffle ordering, audiobook seeking, queue controls, embedded artwork, list wrapping, and general navigation.

Search is now available directly from the main menu.

The new wheel-driven QWERTY keyboard searches across:

Track searches include title, artist, album, filename, genre, and composer metadata. Matching is accent-insensitive and supports multiple search terms, with exact and prefix matches ranked first.

Search results reuse the existing playback and browsing flows. Tracks can be played or opened through their context menus, while albums, artists, playlists, and audiobooks open their corresponding library views.

The interface was designed for the Y2’s 480 × 360 display:

Search also has separate instructions before typing and a dedicated message when no results are found.

To keep it responsive with large libraries, searchable metadata is indexed once per active library. Recent queries are cached, and only the best 100 results are retained. In a synthetic 10,000-track benchmark, ordinary indexed queries completed in approximately 2–5 ms, while cached queries completed in approximately 0.02 ms.

FM Radio

Y2Player now includes support for the MediaTek MT6627 FM tuner found in newer FM-equipped Y2 hardware revisions.

The FM Radio interface supports:

Important Y2 Hardware Notice

Innioasis has confirmed that there are two Y2 hardware revisions.

The original Y2 batch does not contain the required FM radio hardware. These devices may be able to open the FM interface and tune frequencies, but they cannot receive a usable radio signal and will normally output only static.

Newer Y2 units include the required FM circuitry and use the FM-enabled stock firmware.

Because many existing Y2 devices cannot receive FM, the FM Radio entry is hidden by default. Owners of compatible newer hardware can enable it under:

Settings → Interface → FM Radio

Flashing FM-enabled stock firmware cannot add the missing tuner circuitry to an original Y2. FM reception depends on the physical hardware revision, not only the installed firmware.

Faster Alphabet Navigation

Large alphabetically sorted libraries now support iPod-style alphabet scrolling.

Normal and moderately fast wheel movement retain the existing precise scrolling behavior. Sustained fast movement activates an alphabet scrub mode with a large temporary # or A–Z overlay.

Alphabet scrolling is available where the visible order is genuinely alphabetical, including supported:

It remains disabled for album track order, Recently Played, chronologically sorted albums, Queue, folders, settings, confirmation screens, and circular menus.

The first position for each letter is indexed once per visible list, so moving through a large library does not repeatedly scan every row.

Improved Sleep Timer

The sleep timer now opens a dedicated wheel-controlled selection screen instead of cycling through a small number of presets.

Available choices include:

Reopening the Sleep Timer screen returns to the currently selected option.

Active minute timers now show a live remaining-time countdown throughout the interface. Expired timers are cleared correctly instead of remaining visibly enabled after playback stops.

End of Album and End of Queue follow the active playback collection and queue rather than using an approximate duration.

More Reliable Screen-Off Playback

Y2Player now holds a service-level playback wake lock throughout Preparing and Playing.

Previously, the decoder-level wake lock could be released during the brief asynchronous handoff between one completed track and the next. If the display was asleep at that exact moment, Android could suspend the CPU before the service completed the transition.

The new ownership closes that gap while still releasing the wake lock when playback is:

This fixes playback potentially stopping at the end of a track until the screen was turned back on.

Optional Seeking While Locked

A new option allows the Y2’s Left and Right buttons to seek while the device is locked instead of changing tracks or audiobook chapters.

It can be enabled under:

Settings → Audio → Seeking → Seek When Locked

When enabled, Left and Right use the configured held-seek interval. The option is disabled by default, and headset or Bluetooth transport controls retain their normal behavior.

Wake-Up Seek Fix

A separate input-routing fix prevents a held seek button from being interpreted as multiple Previous or Next commands when the display wakes.

When the unlocked activity is visible, it now has exclusive ownership of local keypad gestures. The vendor broadcast remains available as a screen-off fallback, while genuine headset and Bluetooth media commands remain unaffected.

This is particularly useful for audiobooks, where an interrupted seek could previously skip several chapters.

Correct Playback Order After Disabling Shuffle

Disabling Shuffle now rebuilds the ordered continuation around the currently playing track.

Previously, turning Shuffle off after progressing through a playlist could restart or incorrectly arrange the remaining ordered playback.

The corrected behavior:

Queue Control Fixes

Center-button behavior in Queue now matches other track lists.

A short Center press opens the selected queue entry’s action menu. Holding Center uses the corresponding long-press behavior without accidentally performing both actions.

This removes inconsistent behavior where Queue treated Center differently from Songs and other track views.

Redesigned Equalizer Controls

Equalizer configuration has been redesigned around explicit wheel-controlled selection screens.

Preset selection now displays a complete list instead of cycling blindly through available presets. The list includes Custom whenever individual band values are active.

Selecting an equalizer band opens a dedicated dB value screen:

This replaces the previous short-press and long-press band adjustment system, making the current and resulting values much clearer.

Consistent List Wrapping

The Wrap Lists preference is now respected across all selectable screens.

It applies consistently to:

When Wrap Lists is disabled, selection stops at the beginning and end. When enabled, selection continues from the final item to the first and vice versa.

Queue reordering remains intentionally bounded because that screen edits a target position rather than navigating an ordinary menu.

Improved Back Navigation

Holding the Y2’s top Back button now returns directly to the main menu, matching classic iPod behavior.

Back also dismisses temporary alerts and status messages before navigating away. A second press performs the normal Back action.

Persistent library, playback, Bluetooth, and diagnostic status information is not intercepted.

Artist Navigation Fix

Track Options → Browse Track → Go to Artist now opens the selected artist’s album list.

Previously, this route bypassed the normal artist view and opened a flat list containing every song by that artist.

The corrected behavior now matches:

Music → Artists → Artist Albums

Go to Album and existing featured-artist normalization remain unchanged.

Safer Embedded Artwork

Oversized or malformed embedded artwork is now rejected safely.

Previously, invalid artwork data could trigger an exception while constructing the artwork byte array and potentially crash Y2Player.

The native metadata bridge now:

Valid embedded and external artwork behavior is unchanged.

The permanent transition-mode item and its divider have been removed from the Now Playing footer.

Shuffle and Repeat remain on the left, while queue position remains right-aligned. This gives the footer a more balanced layout and removes information that did not need to remain visible continuously.

This is only a presentation change. Gapless playback, Crossfade, Crossfade Mode, their settings, and their playback behavior remain available.

USB Connection Feedback

Connecting USB now produces a single perceptible haptic response when haptics are enabled and supported by the device.

The implementation uses the existing coalesced USB state instead of reacting independently to every Android power and USB broadcast.

The following do not cause duplicate vibrations:

Settings and Backup Compatibility

The following new preferences are included in Backup & Restore:

Older backups remain compatible and receive safe defaults:

Validation

Version 2.5 has been checked with the complete debug unit-test suite and Android lint.

The latest validation completed successfully with more than 930 unit tests covering navigation, Search, FM state, playback, queue behavior, sleep timers, input routing, artwork, preferences, and backup compatibility.

Installation

The release provides the existing system-only update path as well as a complete rom_y2.zip package for the Innioasis Updater.

For the system-only method, use SP Flash Tool in Download Only mode with only the ANDROID partition selected, pointing to the supplied system.img.

Do not select, format, or flash unrelated partitions.

The complete rom_y2.zip installation performs a full-device installation and erases user data. Before using it:

  1. Export a Y2Player backup.
  2. Copy the backup off the device.
  3. Copy any important music, playlists, diagnostics, and other files to a computer.
  4. Verify the supplied package checksum.
  5. Follow the installation instructions for the Y2 specifically.

Do not use a Y1 package on a Y2.

Reporting Problems

If you encounter a problem, enable verbose diagnostics before reproducing it:

Settings → System → Diagnostics → Verbose Diagnostics

After reproducing the problem, export the report:

Settings → System → Diagnostics → Export Diagnostics

Attach the exported report to a GitHub issue and include:

For FM problems, also mention whether wired headphones were connected and whether FM works in the FM-enabled Innioasis stock firmware.

Thank you to everyone who submitted issues, tested builds, provided diagnostics, and helped investigate the Y2’s different hardware revisions. Your reports directly shaped the Search interface, navigation improvements, timer redesign, playback fixes, and hardware compatibility behavior in this release.

Updating to Y2Player Release2.5

The same steps install this release for the first time or replace the build already on the player. Back up your music before you start.

  1. Check the model and type

    Confirm the player is an Innioasis Y2 before downloading. Y1 players come in two hardware revisions, Type A (software 2.0.0 or later) and Type B (earlier software); the two ROMs are not interchangeable.

  2. Download the package built for your computer

    Use Updater CE for the guided route, or download the portable package for Windows, macOS or Linux from this page. The release's own ZIP is also listed for manual flashing.

  3. Connect the player while it is switched off

    Use a data-capable USB cable and connect the player only when the installer asks. Keep it connected until the flash reports success.

  4. Verify the version after it reboots

    Open the player's Settings or About screen and check that it reports Y2Player Release2.5.

Install Y2Player Release2.5 on your computer

Pick the guide for the computer you will flash from. Each one names the exact package, its size and the steps that machine needs.

Windows

Install on Windows

Windows 11 and Windows 10 are supported; the legacy ZIP is for Windows 7/8 and 32-bit Windows, and Windows on ARM runs its own build natively.

524 MB · 297 MB

macOS

Install on macOS

The macOS package is universal: it runs on Apple silicon and Intel Macs.

342 MB

Linux

Install on Linux

Use the x64 build on an ordinary Intel or AMD desktop, the arm64 build on a Raspberry Pi or other ARM board, and the legacy ZIP on 32-bit Linux.

579 MB · 412 MB · 296 MB

Questions about this update

How do I update Innioasis Y2 to Y2Player Release2.5?

Download the package for your computer from this page, or open Updater CE and choose Y2Player Release2.5 for Innioasis Y2. Connect the player while it is switched off, then let the installer finish and let the player reboot.

Is Y2Player Release2.5 the latest Y2Player release?

The release list on this page is ordered newest first, so the top entry is the latest published build. Preview and nightly builds are labelled as such.

Can I install Y2Player Release2.5 from another computer?

Yes. Download the ZIP here, copy it to the computer that can talk to the player, and follow the install guide there. The package is self-contained.

Which file do I download for Windows, macOS or Linux?

Each portable package in the download section is built for one computer. The guide pages linked under "Install on your computer" name the exact file and its size.

Published by schulzcode's Y2Player project [1] [2]