Skip to content

Innioasis R1 ยท Linux

Install software on Innioasis R1 on Linux

The Innioasis R1 is a dedicated voice recorder with physical record, playback and T-Mark buttons. Its factory software is archived as rom_r1.zip. The R1 uses recorder firmware rather than player firmware, so a package from a Y or G series player must never be installed on it. These are the Linux routes for the Innioasis R1.

Your computerWindowsmacOSLinux All platforms

Prepare Linux for the install

  1. Download UpdaterCE.AppImage, make it executable with chmod +x UpdaterCE.AppImage, and run it. The current AppImage targets Intel/AMD x86_64 systems.
  2. If the AppImage does not start on Ubuntu 22.04 or newer, install libfuse2 with your package manager. On Ubuntu 24.04 the package is libfuse2t64. Do not run the app as root.
  3. If Updater CE cannot open the player, add the MediaTek USB permission rule: save SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", MODE="0666", GROUP="plugdev" as /etc/udev/rules.d/51-innioasis.rules, then run sudo udevadm control --reload && sudo udevadm trigger. Add your user to plugdev if needed.

The official AppImage is for Intel/AMD Linux. No Linux ARM build is listed. Full Linux setup notes.

Software for the Innioasis R1

Restore the stock system

The Innioasis R1 is a dedicated voice recorder with physical record, playback and T-Mark buttons. Its factory software is archived as rom_r1.zip. The R1 uses recorder firmware rather than player firmware, so a package from a Y or G series player must never be installed on it.

Questions people ask

Can I install custom software on the Innioasis R1 with Linux?

Yes, when the project lists the Innioasis R1. Every project card above opens the Linux guide for that software and model.

Do I need a driver on Linux?

Add the udev rule for vendor ID 0e8d and make the AppImage executable.

Will I lose my music?

Back up first. A full system install can wipe internal storage; the microSD card is normally left alone.

How do I restore the factory software?

Choose the model and Original Software in Updater CE, pick a stable release, then run Install / Restore.

Other platforms

Was this useful?

Your answer helps improve this guide.