Skip to content

Innioasis R1 ยท Windows

Install software on Innioasis R1 with a Windows PC

The Innioasis R1 is a dedicated voice recorder with physical record, playback and T-Mark buttons. Its factory software is archived as rom_r1.zip. The R1 uses recorder firmware rather than player firmware, so a package from a Y or G series player must never be installed on it. These are the Windows routes for the Innioasis R1.

Get Updater CE for WindowsWindows install guidesDownload the Windows MediaTek driver
Your computerWindowsmacOSLinux All platforms

Prepare Windows for the install

  1. Download the Innioasis Updater CE installer (installer.exe) from the official GitHub release and run it. If SmartScreen says “Windows protected your PC”, choose More info then Run anyway only for the file you just downloaded from github.com/y1-community/Innioasis-Updater.
  2. Install the MediaTek USB driver with DriverInstall.exe, then restart the PC. The driver is what lets Windows see a powered-off player when Updater CE asks for it.
  3. Use a USB port on the PC itself and a cable that carries data. A charge-only cable or an unpowered hub is the usual reason the player never appears.

Windows 10 and 11 x64 are the normal targets. ARM64 Windows is experimental. Full Windows setup notes.

Software for the Innioasis R1

Restore the stock system

The Innioasis R1 is a dedicated voice recorder with physical record, playback and T-Mark buttons. Its factory software is archived as rom_r1.zip. The R1 uses recorder firmware rather than player firmware, so a package from a Y or G series player must never be installed on it.

Restore Original Software on Innioasis R1Browse the Innioasis R1 archive

Questions people ask

Can I install custom software on the Innioasis R1 with Windows?

Yes, when the project lists the Innioasis R1. Every project card above opens the Windows guide for that software and model.

Do I need a driver on Windows?

Yes, install the MediaTek driver and restart.

Will I lose my music?

Back up first. A full system install can wipe internal storage; the microSD card is normally left alone.

How do I restore the factory software?

Choose the model and Original Software in Updater CE, pick a stable release, then run Install / Restore.

Other platforms

macOSLinuxAll Innioasis R1 guidesAll install guides

Was this useful?

Your answer helps improve this guide.