Install Reborn (Y2Linux / y2reborn) on Innioasis Y2 on Linux

Before you start

• Player: Innioasis Y2. Check the model printed on the player; Reborn (Y2Linux) packages for another model will not work.
• Computer: Linux. The official AppImage is for Intel/AMD Linux. No Linux ARM build is listed.
• Cable: a USB cable that carries data, not a charge-only cable.
• Power: charge the player to at least half before you begin.
• Backup: Reborn is for the Y2 only. Back up the microSD and internal storage; the install replaces the system. Keep a stock Y2 package available for the way back.

Prepare Linux for the install

1. Download UpdaterCE.AppImage, make it executable with chmod +x UpdaterCE.AppImage, and run it. The current AppImage targets Intel/AMD x86_64 systems.
2. If the AppImage does not start on Ubuntu 22.04 or newer, install libfuse2 with your package manager. On Ubuntu 24.04 the package is libfuse2t64. Do not run the app as root.
3. If Updater CE cannot open the player, add the MediaTek USB permission rule: save SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", MODE="0666", GROUP="plugdev" as /etc/udev/rules.d/51-innioasis.rules, then run sudo udevadm control --reload && sudo udevadm trigger. Add your user to plugdev if needed.

The official AppImage is for Intel/AMD Linux. No Linux ARM build is listed. Full Linux setup notes.

Install Reborn (Y2Linux) on Innioasis Y2 on Linux

1. Get Updater CE ready: Install Innioasis Updater CE on a Linux computer and open it. The Linux setup is covered above; the main guide has the download links.
2. Select Innioasis Y2: In Device Model, choose Innioasis Y2. Do not substitute another model, even when the software name is the same.
3. Choose Reborn (Y2Linux): In Software, choose Reborn (Y2Linux). Reborn is for the Y2 only. Back up the microSD and internal storage; the install replaces the system. Keep a stock Y2 package available for the way back.
4. Choose a release: Choose the newest stable release shown for this model. Nightly and pre-release builds are for testing; tick the nightly-builds option only if you need one. Read the release note for the Innioasis Y2 before you continue.
5. Install / Restore: Click Install / Restore. Power the player fully off, then connect it only when Updater CE asks. Run lsusb in another terminal to see the MediaTek vendor ID 0e8d appear briefly.
6. Finish and check: Leave the player and cable alone until Updater CE shows success. After the first start, copy system.img from the stock Y2 package into the Firmware folder on Internal Storage to enable Wi-Fi, FM radio and Bluetooth. Follow the Y2 Reborn radio setup guide for the exact steps.
7. Keep the way back: Restore Original Software for Y2 if you want the stock player back. The stock package is always available from the software archive.

If the install does not work

1. Permission denied or cannot open the USB port: the udev rule is missing or your user is not in plugdev. Add both, unplug the player, and reconnect.
2. The AppImage will not launch: check chmod +x, install libfuse2 or libfuse2t64, and confirm you are on x86_64. A blank window under Wayland usually means trying an X11 session.
3. The player is not detected: use a data cable and a direct port, avoid hubs, and connect only at the prompt. Check lsusb while the player is plugged in.
4. Wrong package or model: return to Device Model and confirm the printed model. On a Y1, confirm Type A or Type B before choosing the asset again.
5. The player stopped responding: do not keep reconnecting. Read the recovery guide and the troubleshooting guide before trying a manual flash.

For a manual recovery on Innioasis Y2, use the files and scatter file that match the model. SP Flash Tool notes.

Going back to Original Software

Restore Original Software for Y2 if you want the stock player back. The stock restore uses the same Updater CE flow: choose Innioasis Y2, choose Original Software, pick a stable release and run Install / Restore.

Questions people ask

Install this on another computer