Skip to content

Rondo · Innioasis Y1 · Windows

Install Rondo on Innioasis Y1 with a Windows PC

A lightweight custom audio system for the Y1 with iPod-style click-wheel menus. This Windows tutorial is for the Innioasis Y1 only. People also search for Rondo Y1, Rondo firmware, Rondo music player; this is the same Rondo install.

Get Updater CEAll Rondo platformsInnioasis Y1 install guidesOpen in Updater
Your computerWindowsmacOSLinux All platforms

Before you start

Check the Y1 hardware type.Y1 players shipped in two hardware revisions. Players that shipped with software 2.0.0 or later are Type A; earlier units are Type B. Pick the matching asset in Updater CE.

Prepare Windows for the install

  1. Download the Innioasis Updater CE installer (installer.exe) from the official GitHub release and run it. If SmartScreen says “Windows protected your PC”, choose More info then Run anyway only for the file you just downloaded from github.com/y1-community/Innioasis-Updater.
  2. Install the MediaTek USB driver with DriverInstall.exe, then restart the PC. The driver is what lets Windows see a powered-off player when Updater CE asks for it.
  3. Use a USB port on the PC itself and a cable that carries data. A charge-only cable or an unpowered hub is the usual reason the player never appears.

Windows 10 and 11 x64 are the normal targets. ARM64 Windows is experimental. Full Windows setup notes.

Install Rondo on Innioasis Y1 with a Windows PC

  1. Get Updater CE ready: Install Innioasis Updater CE on a Windows PC and open it. The Windows setup is covered above; the main guide has the download links.
  2. Select Innioasis Y1: In Device Model, choose Innioasis Y1. Do not substitute another model, even when the software name is the same.
  3. Choose Rondo: In Software, choose Rondo. Rondo is for the Y1 Type A only (players that shipped with software 2.0.0 or later). Do not install it on a Type B Y1 or a Y2.
  4. Choose a release: Choose the newest stable release shown for this model. Nightly and pre-release builds are for testing; tick the nightly-builds option only if you need one. Read the release note for the Innioasis Y1 before you continue.
  5. Install / Restore: Click Install / Restore. When Updater CE asks, power the player fully off and plug it into the Windows PC. Device Manager should briefly show a MediaTek PreLoader USB VCOM or MTK USB Port entry while the player is connected.
  6. Finish and check: Leave the player and cable alone until Updater CE shows success. The first start takes a couple of minutes. For YouTube Music and YouTube, set up a Rondo server; the card, radio and Bluetooth work without one.
  7. Keep the way back: Restore Original Software for Y1 if you want the stock player back. The stock package is always available from the software archive.

If the install does not work

  1. Updater CE cannot see the player: reinstall DriverInstall.exe, restart Windows, and try another USB port. If Core isolation / Memory integrity is enabled, Windows Security can block the MediaTek driver. Turn it off, reinstall the driver, then turn it back on when you are finished.
  2. The install waits for the device: unplug the cable, power the player off again, click Install / Restore, and reconnect only at the fresh prompt.
  3. SmartScreen or antivirus blocks the app: check that the file came from the official y1-community/Innioasis-Updater release, then allow it. Do not run an installer from an untrusted mirror.
  4. Wrong package or model: return to Device Model and confirm the printed model. On a Y1, confirm Type A or Type B before choosing the asset again.
  5. The player stopped responding: do not keep reconnecting. Read the recovery guide and the troubleshooting guide before trying a manual flash.

For a manual recovery on Innioasis Y1, use the files and scatter file that match the model. SP Flash Tool notes.

Going back to Original Software

Restore Original Software for Y1 if you want the stock player back. The stock restore uses the same Updater CE flow: choose Innioasis Y1, choose Original Software, pick a stable release and run Install / Restore.

Open the Innioasis Y1 stock restoreRecovery guide

Questions people ask

Can I install Rondo on Innioasis Y1 on Windows?

Yes. This page is the Windows guide for Rondo on the Innioasis Y1. Install Updater CE, select the model, choose the project and follow the install prompt.

Do I need a driver on Windows?

Yes. Install DriverInstall.exe and restart Windows before connecting the powered-off player.

Will this erase my music?

Rondo is for the Y1 Type A only (players that shipped with software 2.0.0 or later). Do not install it on a Type B Y1 or a Y2. Files on the microSD card are normally left alone, but remove the card first if you want to be certain.

Is Rondo Y1 the same as Rondo?

Yes. Rondo Y1 is one of the names people use for Rondo. This guide covers the same project on the Innioasis Y1.

Does Rondo work on other models?

This project is listed only for the Innioasis Y1 in the current catalogue. Never install a package built for another model.

How do I undo the install?

Restore Original Software for Y1 if you want the stock player back. Open the software archive or the model restore guide for the exact steps.

What if the player is not detected?

Start with the Windows checklist above, then read the troubleshooting guide. A data cable, a direct USB port and connecting only at the prompt fix most connection problems.

Install this on another computer

macOS install guide

Rondo on macOS for the Innioasis Y1.

macOS guide

Linux install guide

Rondo on Linux for the Innioasis Y1.

Linux guide
All Rondo guidesInnioasis Y1 install guidesAll install guides

Was this useful?

Your answer helps improve this guide.