Skip to content

Solar · Innioasis Y1

Install Solar on your Y1.

Solar is a separate community software project. Availability and features can change, so let Updater show the current release for your model.

General Updater guideProject source

Also available: Solar on Y2

Choose the Y1 route

  1. Set Device Model to Y1.
  2. Choose Solar in Software.
  3. Read the release note, select a version, and click Install / Restore.
  4. Power off and connect the player only when Updater asks.
  5. Restore with Y1 Original Software if you need the stock interface again.

Keep the project note in view

Solar is under active development. Treat the project’s own release notes as the authority for current features and model support. The Updater catalogue tells you what the current release data exposes for your selected model.

Updater connection instructions
Connect only at the live prompt.

Go back to Original Software

Solar does not change the route back to the stock interface. Once Updater is set up for your computer, open it on Windows, macOS, or Linux and select Y1 plus Original Software instead of Solar.

  1. Choose a stable Y1 Original Software release.
  2. Click Install / Restore and wait for the live connection prompt.
  3. Power off the Y1 only when asked.
  4. Connect the USB data cable at the prompt and leave it still until success.

Do not manually remove Solar files first, and do not use a Y2 package. If the failure happened before the USB prompt, check the computer setup, cable, and model selection first.

Y1 restore guideTroubleshooting